Whether you are starting from scratch or building off a development platform, these substrates will have you covered.

!
V1000066

Voltera 2” x 3” Substrates

Pack of 10

Blank 50,8 x 76,2 mm FR­4 boards are ready for printing your circuitry on.

Just clamp them to the printing platform and press print to dispense the ink.

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

V1000068

Voltera 3” x 4” Substrates

Pack of 6

Blank 76,2 x 101,6 mm FR­4 boards are ready for printing your circuitry on.

Just clamp them to the printing platform and press print to dispense the ink.

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

V1000070

Voltera 4” x 5” Substrates

Pack of 6

Exact size is 4” x 5.3” / 101,6 x 134,6 mm

These boards are the maximum substrate size the V-One can handle.

Just clamp them to the printing platform and press print to dispense the ink.

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

V1000078

Voltera Pre-Plated Clustered Vias Templates

Working with complex circuits can be challenging when you have drill and fill all your vias. These 3"x4" templates comes pre-drilled and plated along with power and ground rails you can route to.  Another easy way to start prototyping as soon as possible!

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

V1000080

Voltera Pre-Plated Distributed Vias Templates

Pack of 6.

Working with complex circuits can be challenging when you have drill and fill all your vias. These 3"x4" templates comes pre-drilled and plated along with power and ground rails you can route to.  Another easy way to start prototyping as soon as possible!

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

V1000072

Voltera Arduino Uno Templates

Pack of 6. 

Looking to build an Arduino Uno shield?  This templates will help you get started even faster!

Need the Gerber files or mechanical drawings for this substrate? We got 'em!

Arduino is a trademark of Arduino AG.  Check them out at www.arduino.cc

V1000074

Voltera Arduino Mega Templates

Pack of 6.

Looking to build a custom Arduino Mega shield? This pack of templates will help you get started.

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

Arduino is a trademark of Arduino AG.  Check them out at www.arduino.cc

V1000082

Voltera Raspberry Pi B+ Templates

Pack of 6. 

Looking to build a Raspberry Pi HAT?  This pack templates will help you get started even faster!

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

Raspberry Pi is a trademark of the Raspberry Pi Foundation.  Check them out at www.raspberrypi.org

V1000083

Voltera USB Templates

Do any electronics these days not have USB?  This pack of 6 templates (~2"x3") gets you started with all the circuitry you need to connect your USB driver and it has the mounting holes for Type B and Micro B ports!  If you need a male connector, the bottom of the board is already plated so you can plug directly into your computer!

We've created a handy Digikey cart for you to get the components you need:  http://www.digikey.ca/short/32z0r8

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!

V1000076

Voltera Particle Photon Templates

Pack of 6.

Are you starting an IoT project with a Photon?  This pack of templates will help you connect your creations to the internet in an instant!

Need the Gerber files or mechanical drawings for this substrate?  We got 'em!