This solder feeder allows you to feed solder wire automatically from any position.
You can easily configure parameters such as speed and length of the dispensed wire. You can also monitor the consumption thanks to counters.
3 working modes: continuous, discontinuous and programs. In each program you can configure up to 3 steps with different length wire and dispensing speed. Execute cyclically up to 35 programs.
The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing avoiding solder and flux splashing during the soldering process (also available without V-cut).
The ergonomic SF280-A Solder Feed Handle is compatible with solder diameters of Ø 0.8 mm, 1 mm and 1.5 mm (see guide sets).Product Composition
Control Unit: SF Control Unit
Tools: SF280-A Solder Feed Handle
Accessories: GSF10V Guide set for SF280-A Specifications
Weight 2.274 kg
Spool capacity up to 1 kg
Solder diameter Ø 1 mm
Voltage 230V (0.1 A)
Maximum speed 120 mm/s
Ambient operating temp. 10-40 °C
Communication connectors USB-B, peripherals, RJ12 for RS-232 connection